TuringDomain experts
Lead Engineer - Analog IC Design Engineer
Pay not published
About this role, in Turing's words
Turing is seeking a hands-on analog IC design lead to guide engineers building an AI evaluation benchmark. You will combine circuit design and technical review with team coordination, mentoring, and client alignment. Each task requires an AI model to design a transistor-level circuit from a written specification, through device characterization, sub-block design, integration, and closure of a complete operational transconductance amplifier (OTA).
What you'll do
Key Responsibilities
- Coordinate analog engineers and task authors, assign technical ownership, set priorities, resolve blockers, and align scope and delivery expectations with the client.
- Onboard and mentor contributors through worked examples and actionable feedback; establish shared standards for task writing, simulation, solution review, and documentation.
- Characterize devices and design or debug current mirrors, cascodes, differential pairs, bias networks, and gain stages; review operating points, sizing, and design trade-offs.
Show all 8 itemsHide the other 5 in Key Responsibilities
- Direct a benchmark of dozens of complete designs through characterization, sub-block design, integration, and closure stages.
- Translate client objectives into precise task specifications covering subcircuit names, pin order, stage interfaces, fixtures, numerical targets, operating conditions, process corners, and measurement criteria.
- Review golden reference solutions against stage-specific requirements, verify nominal integration, and lead final-block PVT and mismatch evaluation against defined coverage and yield criteria.
- Oversee open-source evaluation tools using IHP SG13G2, xschem, SPICE, ngspice, and CACE or an equivalent harness; ensure graders run reproducibly and headlessly in client containers.
- Review task packages and handoffs, keep private solution notes separate from model-visible materials, and enable the client to independently generate and grade derived tasks.
Candidate background
Required Skills
- Demonstrated transistor-level analog IC design experience, including device operating regions, output resistance (ro), intrinsic gain, and the relationship between device characterization and circuit sizing.
- Experience designing and analyzing current mirrors, cascodes, differential pairs, bias circuits, gain stages, and OTAs, including gain, bandwidth, stability, headroom, and power trade-offs.
- Practical experience with SPICE simulation, DC sweeps and operating-point analysis, AC frequency-response analysis, PVT verification, and statistical mismatch analysis, including setting defensible coverage and yield criteria.
- Demonstrated technical leadership: coordinating engineers, mentoring contributors, reviewing designs, and maintaining quality while managing delivery priorities and client expectations.
- Experience writing precise technical specifications, reproducible testbenches, and clear design explanations that another engineer can use independently.
- Ability to build and debug scripted, headless simulation workflows and containerized evaluation tools, and to work effectively with the required open-source toolchain.
- Clear written and spoken English, with the ability to explain analog design decisions, communicate uncertainty, and resolve ambiguous requirements with technical and client stakeholders.
Preferred Experience
Show all 4 itemsHide these 4 items in Preferred Experience
- Direct experience with IHP SG13G2, xschem, ngspice, and CACE or comparable open characterization tools.
- Experience developing engineering benchmarks, automated graders, or structured technical exercises with objective, reproducible outcomes.
- Experience checking netlist hierarchy, validating submission interfaces, and testing evaluation tools against malformed or degenerate circuits.
- Experience supporting AI evaluation projects, or turning expert engineering knowledge into staged problems and well-documented reference solutions.
Quoted from selected sections of Turing's posting. The full posting may state other conditions. Read the full posting
A closer look
More context, when you need it.
Full job descriptionThe original posting, in Turing's words
Posted by Turing, reproduced here so you can judge the role before clicking. Original posting ↗
About Turing: Based in San Francisco, California, Turing is the world’s leading research accelerator for frontier AI labs and a trusted partner for global enterprises deploying advanced AI systems.
Role Overview
Turing is seeking a hands-on analog IC design lead to guide engineers building an AI evaluation benchmark. You will combine circuit design and technical review with team coordination, mentoring, and client alignment. Each task requires an AI model to design a transistor-level circuit from a written specification, through device characterization, sub-block design, integration, and closure of a complete operational transconductance amplifier (OTA).
You will own technical scope and delivery quality, helping authors turn analog design problems into rigorous, reusable tasks. Human engineers author and review the tasks, reference solutions, and evaluation tools; task scores come from circuit simulation and automated netlist checks under defined rules, never from human or LLM judgment. The role centers on analog engineering, practical automation, and leading a team that can explain and defend its technical decisions.
Key Responsibilities
• Coordinate analog engineers and task authors, assign technical ownership, set priorities, resolve blockers, and align scope and delivery expectations with the client.
• Onboard and mentor contributors through worked examples and actionable feedback; establish shared standards for task writing, simulation, solution review, and documentation.
• Characterize devices and design or debug current mirrors, cascodes, differential pairs, bias networks, and gain stages; review operating points, sizing, and design trade-offs.
• Direct a benchmark of dozens of complete designs through characterization, sub-block design, integration, and closure stages.
• Translate client objectives into precise task specifications covering subcircuit names, pin order, stage interfaces, fixtures, numerical targets, operating conditions, process corners, and measurement criteria.
• Review golden reference solutions against stage-specific requirements, verify nominal integration, and lead final-block PVT and mismatch evaluation against defined coverage and yield criteria.
• Oversee open-source evaluation tools using IHP SG13G2, xschem, SPICE, ngspice, and CACE or an equivalent harness; ensure graders run reproducibly and headlessly in client containers.
• Review task packages and handoffs, keep private solution notes separate from model-visible materials, and enable the client to independently generate and grade derived tasks.
Required Skills
• Demonstrated transistor-level analog IC design experience, including device operating regions, output resistance (ro), intrinsic gain, and the relationship between device characterization and circuit sizing.
• Experience designing and analyzing current mirrors, cascodes, differential pairs, bias circuits, gain stages, and OTAs, including gain, bandwidth, stability, headroom, and power trade-offs.
• Practical experience with SPICE simulation, DC sweeps and operating-point analysis, AC frequency-response analysis, PVT verification, and statistical mismatch analysis, including setting defensible coverage and yield criteria.
• Demonstrated technical leadership: coordinating engineers, mentoring contributors, reviewing designs, and maintaining quality while managing delivery priorities and client expectations.
• Experience writing precise technical specifications, reproducible testbenches, and clear design explanations that another engineer can use independently.
• Ability to build and debug scripted, headless simulation workflows and containerized evaluation tools, and to work effectively with the required open-source toolchain.
• Clear written and spoken English, with the ability to explain analog design decisions, communicate uncertainty, and resolve ambiguous requirements with technical and client stakeholders.
Preferred Experience
• Direct experience with IHP SG13G2, xschem, ngspice, and CACE or comparable open characterization tools.
• Experience developing engineering benchmarks, automated graders, or structured technical exercises with objective, reproducible outcomes.
• Experience checking netlist hierarchy, validating submission interfaces, and testing evaluation tools against malformed or degenerate circuits.
• Experience supporting AI evaluation projects, or turning expert engineering knowledge into staged problems and well-documented reference solutions.
Preferred Educational qualification:
• Bachelor's degree (B.Tech / B.E. / B.S.) in Electrical Engineering, Electronics & Communication Engineering, or a closely related field
• Preferred: Master's (M.Tech / M.S.) or PhD with a focus on analog / mixed-signal IC design or VLSI
Project Details:
• Contract Start Date: Expected to start as soon as possible
• Engagement: 12-14 weeks (with potential chances of extension)
• Commitment - 40 hours/week
• Engagement Type: Contract
• Selection Process : The talents shorlisted will be going through 1 round of AI Interview round and 3 rounds of short interviews with our team
Working with TuringPay, getting started and work, from Turing's own pages
What the platform publishes in general. These are not extra terms confirmed for this particular role.
- Getting paid
- Paid monthly, around the 5th, straight to your bank account, or inside Deel on projects run through Deel. Its help articles disagree on whether that is the 5th calendar day or business day. help.turing.com/articles/9691407757-project-onboarding, help.turing.com/articles/6582454854-what-if-i-haven-t-rec..., help.turing.com/articles/1226770947-project-offboarding
- Before your first paid task
- A short application, with tests on some roles. Turing's review article says an interview is typically required for all roles. Onboarding covers the terms, ID verification with a driver's license or passport, and tax and payment details. help.turing.com/articles/2020987592-apply-for-jobs-at-turing, help.turing.com/articles/9179629201-how-long-does-the-app..., help.turing.com/articles/9691407757-project-onboarding
- How much work
- Review takes from 48 hours to 6 weeks after you finish applying, and the client makes the final choice. No reply within 6 weeks usually means you were not selected. help.turing.com/articles/9179629201-how-long-does-the-app..., help.turing.com/articles/2020987592-apply-for-jobs-at-turing
- Contract
- Depending on the project, the engagement rests on Turing's Terms of Service and a Service Agreement, on Deel, or on a partner that provides the contract. help.turing.com/articles/6582454854-what-if-i-haven-t-rec...
Read on the pages linked above on 23 Sep 2026. Platforms change these terms, so check the linked page before you rely on one.
How does the pay compare?Across Domain experts roles, not this role alone
From our own daily reads of every open listing on the platforms we follow, not from Turing's posting. How we count.
Pay across the field: Domain experts
Across 1482 roles in this field with a stated hourly rate in US dollars, on 25 platforms, the middle half pays $65 to $125 an hour at the top of the range, and the median is $93.
| Platform | Roles | Top of range, per hour |
|---|---|---|
| micro1 | 256 | $14 to $400 · median $105 |
| Handshake AI | 190 | $30 to $300 · median $85 |
| Mercor | 166 | $35 to $350 · median $120 |
| Alignerr | 162 | $20 to $200 · median $80 |
| AfterQuery | 131 | $45 to $200 · median $100 |
Sources and listing historyWhere this information comes from
This listing's history
- First seen here on 17 Nov 2026, and still on Turing's list when we last read it on 21 Nov 2026.
- Posted by Turing
- First seen by AIPayList
- Last seen live
- Listing ID
- 119097
Keep exploring
More like this
Related field, different requirements. Check each role's own page before you apply.